Home > Equipment > Pumps & Plumbing >

Chugger Pump MAX TCPSS Motor Brew Pump

chugger-pump-max-tcpss-motor-brew-pump


 
Alternative Views:


List Price: $349.99
Our Price $295.99
Savings: $54.00
Brand: Chugger

Product Code: LG85105
Qty:

Description Technical Specs
 
Chugger Pump MAX TCPSS Motor Brew Pump has a new look and design.

The TCPSS MAX Chugger Pump is a Totally Enclosed Fan Cooled (TEFC) Motor is Chugger's top of the line model. This is the TEFC model. Chugger Max contains sealed bearings. No oil necessary. The Chugger MAX is shipped ready for installation. The 7 screws on the pump head may be removed and the pump head can be rotated as required to fit your piping system. Get ready to move some liquor!

This new design has a on / off switch located on the electrical box itself. And the 110V / 220v toogle switch is now located inside the electrical housing. You can still easily toggle between 115V and 230V on this TEFC model to meet your exact specifications.

Features include:
  • Inlet 1" FPT Outlet 1/2" MPT
  • .125 HP (1/8 HP)
  • Electrical 115V & 230V AC Motor Hz: 50/60
  • Motor Only: 1.4 Amps
  • Motor and Pump: 2.0 Amps
  • RPM: 3500
  • Ryton/Teflon/Glass Impeller
  • Max Flow: 17 GPM
  • Max Head: 27 FT
  • Stainless Steel Housings
  • Ceramic Washers
  • Silicon O-Ring
  • Materials are FDA Compliant
  • Components Are UL recognized
  • 55" cord (Plug NOT included)
  • Max Flow 17GPM @12PSI
  • Can handle liquids of 250F
  • Non-Submersible
  • Food Grade

Brewers Note:
This pump is not a self priming pump, place it below the water source you are using to feed the pump for best performance. DO NOT RUN DRY - This will void the warranty and damage the pump.

Accessories
Chugger Pump MAX Replacement Housing O-Ring 1.5" x 1" MPT Tri-Clamp - Stainless Steel Chugger Pump MAX Replacement SS Housing Screws (Set of 7) Chugger Pump MAX Head Rebuild Repair Kit
Our Price $1.99

Add
Our Price $13.85

Add
Our Price $4.45

Add
Our Price $28.99

Add
chugger-pump-max-replacement-housing-o-ring 1.5-inch-by-1-inch-mpt-tri-clamp-stainless-steel chugger-pump-max-replacement-ss-housing-screws chugger-pump-max-head-rebuild-repair-kit
1" MPT with Barb - Stainless Steel Chugger MAX Stainless Steel Center Inlet Replacement Head 1" x 3/4" MPT Hex Reducer Stainless Steel
Our Price $7.89

Add
Our Price $178.99

Add
Our Price $6.99

Add
1.5-inch-by-1-inch-mpt-with-barb-stainless-steel chugger-max-stainless-steel-center-inlet-replacement-head 1-inch-npt-to-1/2-inch-npt-bushing-stainless-steel

Average Rating: 4.5 of 5 Total Reviews: 2 Write a review »

  0 of 0 people found the following review helpful:
 
Powerful pump! leaks a little June 30, 2017
Reviewer: Jeff Carlson from Annapolis, MD United States  
Very nice, powerful pump.  Shipping was super quick, too.

The pump does have a very slow-drip leak in two places, however...  one between the housing and the front cover, and another between the housing and the rear bracket.  Around 1 to 2 drips per minute.

Easily a 5-start product without the drippage.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
To The Max!!! July 13, 2016
Reviewer: Royal Lush from United States  
To the Max in more ways than one. Very nice product at a competitive price point. The Goblin is responsive to customer concerns. The only complaint I may have is that you have to deal with installing your own power plug. Haven't had a chance to Max Out the pump yet; but, when I do, it will be To The Max!

Was this review helpful to you?